Piston check valves are essential for controlling fluid flow in various industrial applications. They belong to the check valve family, which permits only unidirectional flow in a system. In this article, we explore how a piston check valve works, its installation process, and compares to other types of check valves.

Piston Check Valve Operation

A piston, or lift, check valve is a type of check valve in which a piston is the valve disc for controlling fluid flow. Before delving into its operation, it is important to review its components using a typical diagram.

Piston Check Valve Diagram

Like other check valves, a piston check valve has a mechanism to keep the disc in the seating position. This is usually a spring, but it could be any other mechanism that provides a force contrary to fluid flow. One key attribute of piston check valves is a guide, which prevents misalignment of the piston as it opens and closes. The following diagram highlights the basic components of a piston check valve.

China Lift Check Valve Manufacture,China Lift Check Valve Facoty,China Lift Check Valve Supplier.

How Does a Piston Check Valve Work?

This section reviews the operation of a piston check valve when in forward flow, no or low flow, and reverse flow.

Forward Flow

When fluid flows in the desired direction, it exerts pressure to lift the piston off its seat. After attaining a threshold pressure, the fluid overcomes the resistance from the spring and gravity, hence lifting the piston. The particular pressure at which lifting occurs depends on design parameters like the spring stiffness and weight of the piston. Once lifting occurs, the fluid flows through the valve with minimal resistance.

Low or No Flow

If the pressure on the piston decreases or stops, the gravity and spring force move the piston to close the valve gradually. This will occur until the piston rests entirely on the seat to stop the flow completely.

Reverse Flow

The valve design is such that if there is an attempt at reverse flow, the back pressure pushes the piston firmly onto the seat. As a result, backflow is not possible. This protects the upstream components from potential damage and prevents contamination from backflow.

Piston Check Valve Installation

Proper piston check valve installation is essential for optimal performance and longevity. Here is a step-by-step guide based on industry best practices for installing a piston check valve.

Shut Down the System

Ensure the system is depressurized and drained. Follow appropriate lockout/tagout procedures to prevent accidental operation during installation.

Preparation

• Inspection: Inspect the valve and piping before installation for damage or debris. Ensure the valve is the correct type and size for the application.
• Clean the Pipeline: Clean the pipeline to remove any dirt, debris, or foreign materials that could affect the valve’s operation.
• Check Flow Direction: Verify the flow direction marking on the valve body. Because piston check valves are unidirectional, they must be in the correct orientation to function properly.

Install the Valve

• Positioning: Position the valve between the pipeline flanges, ensuring it is aligned with the flow direction. The valve installation can be horizontal or vertical, according to the manufacturer’s specifications.
• Gasket Installation: Place the appropriate gaskets between the valve and pipeline flanges. Ensure the gaskets’ correct alignment to prevent leakage.
• Bolt Tightening: Insert the flange bolts and tighten them evenly using a star pattern to ensure uniform gasket compression. Use a torque wrench to apply the torque according to the manufacturer’s specifications.

Post Installation

• Alignment: Ensure the valve and pipeline are adequately aligned. Misalignment can cause stress on the valve and piping, leading to potential leaks or damage.
• Piping Support: Provide adequate support for the valve and piping to prevent undue stress on the valve body. Use hangers, supports, or brackets as per requirements.
• Final Inspection: Perform a final inspection to ensure all bolts are tight and have the correct valve orientation.

System Restart

• Gradual Pressurization: Slowly pressurize the system to check for leaks. Gradually increase the pressure while monitoring the valve and surrounding piping for any signs of leakage.
• Operational Check: Test the valve operation by introducing flow to verify that the piston lifts and seals correctly. Observe the valve during normal operation to ensure it functions as expected.

Piston Check Valve vs Swing Check Valve

Piston Check Valve vs Ball Check Valve